Go Back   PowerShare » Free Downloads » Free Apps
LinkBack Thread Tools Display Modes
Old 07-13-2019, 02:20 PM
Senior Member
Join Date: Dec 2014
Posts: 25,845
Default Siemens Syncrofit 15.1.1 for Catia5-NX x64-SSQ

Siemens Syncrofit 15.1.1 for Catia5-NX x64-SSQ

Siemens Syncrofit 15.1.1 for Catia5-NX x64-SSQ | 805 MB

Syncrofit is an environment for automating the placement and selection of fasteners at the stages of design and technological preparation, performing design checks, describing the technological process of assembly, as well as preparing data for equipment. Syncrofit can run on NX and CATIA V5 CAD systems.

Syncrofit allows you to set a parametric description of the fastener seams and fastener kits, carry out the selection of fasteners according to specified rules, check the compliance of the fasteners with the fastener placement rules, describe the technological sequence of assembly, including manufacturing operations, temporary fasteners and temporary holes. Syncrofit also allows you to prepare data for projectors and drilling machines and other equipment.
Syncrofit features:
Design preparation Parametric description of fastening seams
Determination of package thickness for each fastener position
Selection of different types of fasteners according to different rules in accordance with the calculated thickness of the package
Description and hole creation
Loading and positioning solid-state fasteners
Creating a simplified fastener
Description of adhesive joints
Automated verification of compliance with the fastener placement rules (distance from the edges of parts, the step between fixing points and fixing seams, cutting into radii, etc.)
Description of welded joints
Modeling tools
Surface treatment description
Formation of design specification fasteners
Data preparation for projectors, drilling machines and automated riveting systems
Technological preparation Description of the sequence of assembly
Creating individual operations and states
Creating temporary fasteners
Creating temporary holes
Formation of production specification with temporary fasteners
Benefits Syncrofit offers:
Significant reduction of time spent on the placement and selection of fasteners
Reducing the number of errors in the placement of fasteners, making changes, preparing data for production
Increasing the rate of change
Reducing the time required to verify the correct placement of fasteners
A complete and accurate description of fasteners in the early stages of design.
High level of detail requirements for suppliers
Fast data preparation for various equipment

Year / Release Date: 2019
Version: 15.1.1
Developer: Siemens PLM Software
Developer site: www.plm.automation.siemens.com/en/products/
Digit capacity: Win 7/8/10 64bit
Interface language: English
Tabletka: Present (TeAM SolidSQUAD-SSQ)
System requirements
For Syncrofit 15.1.1 for CATIA V5
CATIA V5 R25-R28 64-bit
For Syncrofit 15.1.1 for Siemens NX
NX-10.0.2 + 64-bit (to use NX-10 on Win10 the minimum requirement is NX-10.0.3)
NX-11.0.1 + 64-bit
NX-12.0.1 + 64-bit (to use NX-12 the minimum supported version is NX-12.0.1)
NX-1847 Series 64-bit (1847-1867)





Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT. The time now is 03:37 AM.
Copyright 2014, PowerShare.